| Specifications | |
|---|---|
| Assay (acidimetric) | 70.0 - 72.0 % |
| Colour | ≤ 10 Hazen |
| Chlorate (ClO₃) | ≤ 10 ppm |
| Chloride (Cl) | ≤ 3 ppm |
| Free chlorine | ≤ 0.5 ppm |
| Phosphate and Silicate (as SiO₂) | ≤ 5 ppm |
| Sulphate (SO₄) | ≤ 10 ppm |
| Total nitrogen (N) | ≤ 10 ppm |
| Heavy metals (as Pb) | ≤ 1 ppm |
| Ag (Silver) | ≤ 0.1 ppm |
| Al (Aluminium) | ≤ 0.05 ppm |
| As (Arsenic) | ≤ 0.05 ppm |
| Ba (Barium) | ≤ 0.02 ppm |
| Be (Beryllium) | ≤ 0.02 ppm |
| Bi (Bismuth) | ≤ 0.1 ppm |
| Ca (Calcium) | ≤ 0.5 ppm |
| Cd (Cadmium) | ≤ 0.05 ppm |
| Co (Cobalt) | ≤ 0.05 ppm |
| Cu (Copper) | ≤ 0.1 ppm |
| Fe (Iron) | ≤ 1.0 ppm |
| Ge (Germanium) | ≤ 0.05 ppm |
| Hg (Mercury) | ≤ 0.005 ppm |
| K (Potassium) | ≤ 0.1 ppm |
| Li (Lithium) | ≤ 0.02 ppm |
| Mg (Magnesium) | ≤ 0.5 ppm |
| Mn (Manganese) | ≤ 0.02 ppm |
| Mo (Molybdenum) | ≤ 0.05 ppm |
| Na (Sodium) | ≤ 0.5 ppm |
| Ni (Nickel) | ≤ 0.1 ppm |
| Pb (Lead) | ≤ 0.05 ppm |
| Sr (Strontium) | ≤ 0.02 ppm |
| Ti (Titanium) | ≤ 0.1 ppm |
| Tl (Thallium) | ≤ 0.05 ppm |
| V (Vanadium) | ≤ 0.05 ppm |
| Zn (Zinc) | ≤ 0.1 ppm |
| Zr (Zirconium) | ≤ 0.1 ppm |
| Residue on ignition (as sulphate) | ≤ 30 ppm |
| Identity | passes test |
| Density (d 20/20) | approx. 1.7 |
| Conform to ACS, ISO, Reag.Ph Eur. | |
Log in
Register
Key Spec Table
| Grade Value |
|---|
| ACS,ISO,Reag. Ph Eur |
| Description | |
|---|---|
| Catalogue Number | 100514 |
| Product Information | |
|---|---|
| Grade | ACS,ISO,Reag. Ph Eur |
| HS Code | 2811 19 80 |
| Physicochemical Information | |
|---|---|
| Boiling point | 198.7 °C (1013 hPa) |
| Density | 1.68 g/cm3 (20 °C) |
| Melting Point | -18 °C |
| Safety Information according to GHS | |
|---|---|
| Hazard Pictogram(s) |   |
| Hazard Statement(s) | H271: May cause fire or explosion; strong oxidizer. H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. |
| Precautionary Statement(s) | P210: Keep away from heat. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection. P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician. |
| Storage class | 5.1A Strongly oxidizing hazardous materials |
| WGK | WGK 1 slightly water endangering |
| Disposal | 22 Inorganic peroxides and oxidants as well as bromine and iodine should be rendered harmless by reduction with acidic sodium thiosulfate solution (Cat. No. 106513); container D or E. Slightly soluble oxidants should be collected separately in container E or I. |
| Safety Information | |
|---|---|
| Hazard Symbols |  Oxidising Corrosive |
| Categories of danger | oxidizing, corrosive |
| R Phrase | R 5- 8-35 Heating may cause an explosion.Contact with combustible material may cause fire.Causes severe burns. |
| S Phrase | S 23-26-36-45 Do not breathe vapour.In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). |
| Storage and Shipping Information | |
|---|---|
| Storage | Store at +5°C to +30°C. |
| Transport Information | |
|---|---|
| Declaration (railroad and road) ADR, RID | UN 1873 , 5.1 (8), I |
| Declaration (transport by air) IATA-DGR | UN 1873 , 5.1 (8), I |
| Declaration (transport by sea) IMDG-Code | UN 1873 , 5.1 (8), I, Segregation Group: 1 (Acids) |
 |
||||
|
